Building the IC-2 Flexliner:
Here is the work plan. You can get a bigger one by e-mailing me. 1.7 mb!
On the reason why the LGB radies are too small, I needed to reduce the length 33%. IC-2 is also broader as the normal LGB trains. Perhaps it will be nesssesary to give the train his own line. My IC-2 runs up apon the pergola.
At first, with help from a copy maschine, a model in cardboard:
then a model in light concrete:
the body are bended over the concrete model :
The wawes are made of heavy, watertight tape:
The noses are made of foamsausage:
Two bogies, in front and in back :
The motorblock in the middle, with a coat of lead, and with accessories:
The ends are made with function as a drawer. Then later, You can inspect the light and mount interior, if You want.
The frontlight cantains 3 yellow and two red electrode valves in both ends and a resistor of 680 ohm.
Now, letīs arrange the front and backlights with automatic shift for lights in the travel direction. Best to do it now, later on will be difficult. I have used yellow and red 5mm two-electrode valves and a resistor of 680 ohm.
How to place the wires on an 2061 B07 LGB motorblock.
Then You can place the body on the motorblock and go.
The IC2 flexliner has been sold to another railway 7.5.05.